$70,000.00
| Condition | Pre-Owned |
|---|---|
| Brand | Tigercat |
| Hours | 13026 |
| Motor | Tigercat FPT N45 Tier 4f |
| Delimber | None |
| Location | 1418 Old Hwy 52 S Moncks Corner SC 29461 |
Service & Repair Highlights
Tight & Responsive: We replaced pins and bushings throughout the machine wherever wear was detected, ensuring tight tolerances and smooth operation.
Replacement Parts: Swing gearbox and main boom cylinder have been replaced.
Leak-Free Performance: All hydraulic leaks have been identified and repaired, with fresh seals installed to keep your pressures high and your job site clean.
Stop worrying about downtime and get straight to the landing. This loader has been thoroughly evaluated and overhauled by our shop technicians. We’ve handled the heavy maintenance so you can focus on production from day one.
Equipment financing and delivery available
FRESHLY SHOP-EVALUATED & UPGRADED | WORK-READY PRODUCTION MACHINE If you need serious pulling power and zero downtime, this 2019 John Deere 748L-II dual arch skidder is tight, dry, and ready for the woods. The Deere L-II series is legendary for its durability, and this specific machine has just gone through an extensive shop refresh to ensure it delivers maximum uptime from day one. From a tight center joint to upgraded 35.5 tires, the heavy lifting has already been done for you. KEY MACHINE SPECIFICATIONS & SHOP UPDATES Upgraded Flotation: Rigged with massive 35.5x32 tires to handle wet ground, steep slopes, and tough terrain with ease. Tight & Right: Fully reworked with all-new pins and bushings—no sloppy play in the arches or steering. Refreshed Hydraulics: All major cylinders have been inspected, resealed, and freshly repacked for peak lifting and holding power. Axle Service: Front axle differential locks have been completely resealed and verified. Cab Comfort: Brand new front cab glass installed for crystal-clear operator visibility and safety. Configuration: High-capacity Dual Arch grapple setup for maximum load control and faster cycle times. SKIP THE UNNECESSARY RISKS This 748L-II has been thoroughly gone through by experienced mechanics, saving you thousands in immediate shop bills. It’s got the big rubber, the tight joints, and the hydraulic pressure to anchor your logging crew. FINANCING AND DELIVERY
Just in. 2015 Pitts LP40-4L plantation log trailer for sale. This trailer is in line to be inspected and have any repairs performed. Equipment financing and delivery available
1500 HOURS ON REMAN ENGINE FROM DEERE. Ready to boost your productivity? Look no further than this dependable, low-hour John Deere 643L-II Feller Buncher with only 8,410 operating hours. This isn't just a machine; it's a guaranteed investment in your business's future. We believe in selling machines that are ready to run, so this unit has been thoroughly inspected and repaired by our expert shop team. It comes equipped with an FD55 saw head and is running on great 30.5 rubber. The work is done; all that’s left is for you to put it to use. This machine is built to be a great asset for the next owner for years to come. FD22B also available. EQUIPMENT FINANCING AND DELIVERY AVAILABLE
Stop worrying about downtime and get straight to the landing. This loader has been thoroughly evaluated and overhauled by our shop technicians. We’ve handled the heavy maintenance so you can focus on production from day one. Service & Repair Highlights Tight & Responsive: We replaced pins and bushings throughout the machine wherever wear was detected, ensuring tight tolerances and smooth operation. Reworked Grapple: The grapple has been professionally serviced and refurbished to ensure maximum gripping power and structural integrity. Leak-Free Performance: All hydraulic leaks have been identified and repaired, with fresh seals installed to keep your pressures high and your job site clean. Ready for the Woods This isn't a "fixer-upper"—it’s a workhorse. Our technicians have cleared this unit for immediate duty, ensuring it meets the demands of high-cycle loading. Equipment financing and delivery available
SHOP TEST, JOB READY LOG LOADER Looking for a dependable, work-ready loader? This unit just came through our shop and is fully prepped for the woods. We completely resealed the main hydraulic pump, checked and set all hydraulic pressures to spec, and installed fresh pins in the CSI delimber. The grapple is tight, the machine is completely dry, and the overall cosmetic and mechanical condition shows consistent, quality maintenance. No projects, no leaks—hook on and start loading. Call or message today for hours, specs, or to schedule a viewing. EQUIPMENT FINANCING AND DELIVERY AVAILABLE
Just out of the shop. We replaced the saw head with an FD55. FD22B also available. Saw head checks out. New carbide teeth installed. Cylinders packed as needed. Replaced front valve bank. Pins and bushings replaced as needed. Nice clean cutter. Ready to work. Other tires available upon request. Equipment financing and delivery available
FIELD-INSPECTED, SHOP-OVERHAULED & DECK-READY Keep timber moving without the downtime. This 2019 Tigercat 620E pairs proven high-production capability with recent comprehensive shop servicing, making it an immediately dependable workhorse for your harvesting crew. Equipped with a high-capacity 21 sq. ft. dual-arch grapple, heavy-duty axles, and a fuel-efficient FPT N67 Tier 4F engine, this machine delivers the pulling power, tight turns, and continuous traction required for high-volume dragging in tough timber and steep ground. KEY WORK & CONDITION HIGHLIGHTS Shop-Inspected & Certified: Thoroughly evaluated bumper-to-bumper by experienced forestry technicians—mechanically sound and fully dry. Tight Tolerances: Fitted with all-new pins and bushings, eliminating joint play for responsive arch and grapple control. Near-New Rubber: Riding on deep-tread 30.5 Firestone tires at ~95% life, saving you thousands in upfront tire replacement costs and providing immediate flotation and grip. Refreshed Cab: Features fresh glass all around for maximum 360° landing visibility, paired with smooth, low-effort joystick controls to reduce operator fatigue over long shifts. Heavy-Duty Powertrain: Heavy-duty Tigercat axles and hydrostatic drive built to withstand relentless logging duty cycles. EQUIPMENT FINANCING AND DELIVERY AVAILABLE.
2001 Caterpillar 525B skidder serial number 3KZ00266. This is a dismantled Cat 525B skidder for used Cat 525B skidder parts sales. Single arch skidder. Both axles are still under the machine. Front half has fire damage. Dozer blade and dozer cylinders still on machine.
2009 Caterpillar 545C skidder serial number CAT0545CP54500458. This is a dismantled Cat 545C skidder for used Cat 545C skidder parts sales. Front half of the machine. Fire damage. Front axle, dozer blade, and dozer cylinders are still in the machine.

We have trusted financing partners standing by to work for you to get you the best rate
on your terms.

We have our own trucks and trusted hauling partners to get your equipment to you at
the best rates.

Have a trade in or need to sell your equipment?
We buy used logging equipment and salvage everyday.