$80,000.00
| Condition | Pre-Owned |
|---|---|
| Brand | Deere |
| Hours | 9940 |
| Motor | PowerTech PSS 6.8L Tier 4F |
| Tire Size | 30.5s |
| Location | 1418 Old Hwy 52 S Moncks Corner SC 29461 |
2019 John Deere 748L-II Dual Arch Grapple Skidder
If you need serious pulling power and zero downtime, this 2019 John Deere 748L-II dual arch skidder is tight, dry, and ready for the woods. The Deere L-II series is legendary for its durability, and this specific machine has just gone through an extensive shop refresh to ensure it delivers maximum uptime from day one.
From a tight center joint to upgraded 35.5 tires, the heavy lifting has already been done for you.
Upgraded Flotation: Rigged with massive 35.5×32 tires to handle wet ground, steep slopes, and tough terrain with ease.
Tight & Right: Fully reworked with all-new pins and bushings—no sloppy play in the arches or steering.
Refreshed Hydraulics: All major cylinders have been inspected, resealed, and freshly repacked for peak lifting and holding power.
Axle Service: Front axle differential locks have been completely resealed and verified.
Cab Comfort: Brand new front cab glass installed for crystal-clear operator visibility and safety.
Configuration: High-capacity Dual Arch grapple setup for maximum load control and faster cycle times.
Skip the unnecessary risks. This 748L-II has been thoroughly gone through by experienced mechanics, saving you thousands in immediate shop bills. It’s got the big rubber, the tight joints, and the hydraulic pressure to anchor your logging crew.
CURRENTLY IN OUR SHOP We just started on this machine in our shop. So far the machine checks out great mechanically. Packing a few cylinders and replacing the bushings where the head attaches to the arms. This machine will have new 30.5s installed. More information soon. EQUIPMENT FINANCING AND DELIVERY AVAILABLE
We just pulled this 2022 Pitts LP40-4L into the yard and it’s headed straight for the shop. At W & W, we don’t just move equipment; we make sure it’s woods-ready. Our technicians are currently performing a full bumper-to-bumper evaluation. Once the inspection is complete, we will address any necessary repairs, bushings, or structural needs to ensure this trailer meets our standards before it hits the job site. Year/Make/Model: 2022 Pitts LP40-4L Type: 4-Bunk Plantation Trailer Status: Currently undergoing inspection & reconditioning Availability: Coming Soon Check back shortly for full specs, updated photos, and pricing. Want to be first in line? Give us a call today for more details while it’s still in the shop. EQUIPMENT FINANCING AND DELIVERY AVAILABLE
This trailer is ready to generate revenue immediately. Equipped with essential features like disc brakes and a rear lift axle, it delivers superior handling and flexibility. It has just completed a comprehensive, full-service inspection in our shop, ensuring maximum dependability. We replaced one rotor with new brake pads. New brake pads on opposite rotors. New hub, hub seals, and wheel seals. 4 new virgin 24.5s. New 7 way pin connector. Thoroughly vetted and ready to hit the road. Ready to go to work today! Equipment financing and delivery available
1500 HOURS ON REMAN ENGINE FROM DEERE. Ready to boost your productivity? Look no further than this dependable, low-hour John Deere 643L-II Feller Buncher with only 8,410 operating hours. This isn't just a machine; it's a guaranteed investment in your business's future. We believe in selling machines that are ready to run, so this unit has been thoroughly inspected and repaired by our expert shop team. It comes equipped with an FD55 saw head and is running on great 30.5 rubber. The work is done; all that’s left is for you to put it to use. This machine is built to be a great asset for the next owner for years to come. FD22B also available. EQUIPMENT FINANCING AND DELIVERY AVAILABLE
Just out of the shop. We replaced the saw head with an FD55. FD22B also available. Saw head checks out. New carbide teeth installed. Cylinders packed as needed. Replaced front valve bank. Pins and bushings replaced as needed. Nice clean cutter. Ready to work. Other tires available upon request. Equipment financing and delivery available
THIS LOADER DOES NOT HAVE A DELIMBER. DELIMBERS AVAILABLE. Service & Repair Highlights Tight & Responsive: We replaced pins and bushings throughout the machine wherever wear was detected, ensuring tight tolerances and smooth operation. Replacement Parts: Swing gearbox and main boom cylinder have been replaced. Leak-Free Performance: All hydraulic leaks have been identified and repaired, with fresh seals installed to keep your pressures high and your job site clean. Stop worrying about downtime and get straight to the landing. This loader has been thoroughly evaluated and overhauled by our shop technicians. We’ve handled the heavy maintenance so you can focus on production from day one. Equipment financing and delivery available
Dual arch 2003 Tigercat 630B skidder serial number 6301821. This is a dismantled tigercat skidder for used parts sales. 1400 rear axle. No boom. Winch and all cylinders left.
Single arch 1997 Tigercat 630 skidder serial number 6300266. This is a dismantled tigercat skidder for used parts sales. No axles left. Small grapple and winch.
Single arch 2005 Tigercat 630c skidder serial number 6302288. This is a dismantled tigercat skidder for used parts sales. Sweda axles with dual arch, boom, and cylinders and cab.

We have trusted financing partners standing by to work for you to get you the best rate
on your terms.

We have our own trucks and trusted hauling partners to get your equipment to you at
the best rates.

Have a trade in or need to sell your equipment?
We buy used logging equipment and salvage everyday.