$89,000.00
| Availability | In Our Shop |
|---|---|
| Condition | Pre-Owned |
| Brand | Deere |
| Hours | 8410 |
| Engine | 6.8L Tier 4 (Reman – 1500 hrs) |
| Tire Size | 30.5x32s |
| Location | 1418 Old Hwy 52 S Moncks Corner SC 29461 |
Ready to boost your productivity? Look no further than this dependable, low-hour John Deere 643L-II Feller Buncher with only 8,410 operating hours.
This isn’t just a machine; it’s a guaranteed investment in your business’s future. We believe in selling machines that are ready to run, so this unit has been thoroughly inspected and repaired by our expert shop team. It comes equipped with an FD55 saw head and is running on great 30.5 rubber. The work is done; all that’s left is for you to put it to use. This machine is built to be a great asset for the next owner for years to come. FD22B also available.
CURRENTLY IN OUR SHOP We just started on this machine in our shop. So far the machine checks out great mechanically. Packing a few cylinders and replacing the bushings where the head attaches to the arms. This machine will have new 30.5s installed. More information soon. EQUIPMENT FINANCING AND DELIVERY AVAILABLE
Just in. 2015 Pitts LP40-4L plantation log trailer for sale. This trailer is in line to be inspected and have any repairs performed. Equipment financing and delivery available
Looking for a trailer that’s actually ready for the woods? This 2017 Pitts LP40-4L has been through our shop for a comprehensive overhaul. Rather than buying someone else’s maintenance backlog, you’re getting a unit that our technicians have already inspected and brought up to spec. Mechanical Refresh & Repairs We’ve addressed the critical wear items to ensure this trailer stays on the haul road and out of the shop. Recent service includes: Wheel End Overhaul: New bearings and seals across the board, plus one completely new hub assembly. Complete Brake Service: All-new brake shoe assemblies and two new brake hubs. Air & Timing: Replaced three brake boosters and one slack adjuster for reliable stopping power. Electrical: Installed a brand-new 7-pin connector for a clean, secure tractor-to-trailer link. Why This Pitts? The LP40-4L is known for its durability in plantation thinning and heavy-duty logging. With the recent mechanical work completed, this unit is primed to get back to work immediately. Equipment financing and delivery available
SHOP TEST, JOB READY LOG LOADER Looking for a dependable, work-ready loader? This unit just came through our shop and is fully prepped for the woods. We completely resealed the main hydraulic pump, checked and set all hydraulic pressures to spec, and installed fresh pins in the CSI delimber. The grapple is tight, the machine is completely dry, and the overall cosmetic and mechanical condition shows consistent, quality maintenance. No projects, no leaks—hook on and start loading. Call or message today for hours, specs, or to schedule a viewing. EQUIPMENT FINANCING AND DELIVERY AVAILABLE
Just out of the shop. We replaced the saw head with an FD55. FD22B also available. Saw head checks out. New carbide teeth installed. Cylinders packed as needed. Replaced front valve bank. Pins and bushings replaced as needed. Nice clean cutter. Ready to work. Other tires available upon request. Equipment financing and delivery available
Fully Inspected & Field-Tested Feller Buncher – Ready for the Woods This machine has been thoroughly vetted through our shop and woods tested. We’ve focused on the critical components to ensure it’s job-site ready from day one. Key Upgrades & Repairs: Saw Head: Upgraded to a 2018 DW5603 head with brand-new bearings and seals. Hydraulics & Seals: Saw speed is dialed in. We’ve repacked cylinders and replaced front arm pins and bushings wherever necessary. Engine Maintenance: Freshly serviced with a new valve cover gasket, oil pan gasket, and rear main seal. Rubber: Deep rubber Maxam deep-tread tires. Buyer has the choice of 28L or 30.5 sizes to suit their terrain. This is a clean, reliable cutter that’s been through the ringer so you don’t have to. Ready to drop trees. Equipment financing and delivery available
THIS LOADER DOES NOT HAVE A DELIMBER. DELIMBERS AVAILABLE. Service & Repair Highlights Tight & Responsive: We replaced pins and bushings throughout the machine wherever wear was detected, ensuring tight tolerances and smooth operation. Replacement Parts: Swing gearbox and main boom cylinder have been replaced. Leak-Free Performance: All hydraulic leaks have been identified and repaired, with fresh seals installed to keep your pressures high and your job site clean. Stop worrying about downtime and get straight to the landing. This loader has been thoroughly evaluated and overhauled by our shop technicians. We’ve handled the heavy maintenance so you can focus on production from day one. Equipment financing and delivery available
FIELD-INSPECTED, SHOP-OVERHAULED & DECK-READY Keep timber moving without the downtime. This 2019 Tigercat 620E pairs proven high-production capability with recent comprehensive shop servicing, making it an immediately dependable workhorse for your harvesting crew. Equipped with a high-capacity 21 sq. ft. dual-arch grapple, heavy-duty axles, and a fuel-efficient FPT N67 Tier 4F engine, this machine delivers the pulling power, tight turns, and continuous traction required for high-volume dragging in tough timber and steep ground. KEY WORK & CONDITION HIGHLIGHTS Shop-Inspected & Certified: Thoroughly evaluated bumper-to-bumper by experienced forestry technicians—mechanically sound and fully dry. Tight Tolerances: Fitted with all-new pins and bushings, eliminating joint play for responsive arch and grapple control. Near-New Rubber: Riding on deep-tread 30.5 Firestone tires at ~95% life, saving you thousands in upfront tire replacement costs and providing immediate flotation and grip. Refreshed Cab: Features fresh glass all around for maximum 360° landing visibility, paired with smooth, low-effort joystick controls to reduce operator fatigue over long shifts. Heavy-Duty Powertrain: Heavy-duty Tigercat axles and hydrostatic drive built to withstand relentless logging duty cycles. EQUIPMENT FINANCING AND DELIVERY AVAILABLE.
2009 Caterpillar 545C skidder serial number CAT0545CP54500458. This is a dismantled Cat 545C skidder for used Cat 545C skidder parts sales. Front half of the machine. Fire damage. Front axle, dozer blade, and dozer cylinders are still in the machine.

We have trusted financing partners standing by to work for you to get you the best rate
on your terms.

We have our own trucks and trusted hauling partners to get your equipment to you at
the best rates.

Have a trade in or need to sell your equipment?
We buy used logging equipment and salvage everyday.