$70,000.00
| Condition | Pre-Owned |
|---|---|
| Brand | Tigercat |
| Hours | 13026 |
| Motor | Tigercat FPT N45 Tier 4f |
| Delimber | None |
| Location | 1418 Old Hwy 52 S Moncks Corner SC 29461 |
Service & Repair Highlights
Tight & Responsive: We replaced pins and bushings throughout the machine wherever wear was detected, ensuring tight tolerances and smooth operation.
Replacement Parts: Swing gearbox and main boom cylinder have been replaced.
Leak-Free Performance: All hydraulic leaks have been identified and repaired, with fresh seals installed to keep your pressures high and your job site clean.
Stop worrying about downtime and get straight to the landing. This loader has been thoroughly evaluated and overhauled by our shop technicians. We’ve handled the heavy maintenance so you can focus on production from day one.
Equipment financing and delivery available
2019 John Deere 748L-II Dual Arch Grapple Skidder Freshly Shop-Evaluated & Upgraded | Work-Ready Production Machine If you need serious pulling power and zero downtime, this 2019 John Deere 748L-II dual arch skidder is tight, dry, and ready for the woods. The Deere L-II series is legendary for its durability, and this specific machine has just gone through an extensive shop refresh to ensure it delivers maximum uptime from day one. From a tight center joint to upgraded 35.5 tires, the heavy lifting has already been done for you. Key Machine Specifications & Shop Updates Upgraded Flotation: Rigged with massive 35.5x32 tires to handle wet ground, steep slopes, and tough terrain with ease. Tight & Right: Fully reworked with all-new pins and bushings—no sloppy play in the arches or steering. Refreshed Hydraulics: All major cylinders have been inspected, resealed, and freshly repacked for peak lifting and holding power. Axle Service: Front axle differential locks have been completely resealed and verified. Cab Comfort: Brand new front cab glass installed for crystal-clear operator visibility and safety. Configuration: High-capacity Dual Arch grapple setup for maximum load control and faster cycle times. Skip the unnecessary risks. This 748L-II has been thoroughly gone through by experienced mechanics, saving you thousands in immediate shop bills. It’s got the big rubber, the tight joints, and the hydraulic pressure to anchor your logging crew. FINANCING AND DELIVERY
Stop worrying about downtime and get straight to the landing. This loader has been thoroughly evaluated and overhauled by our shop technicians. We’ve handled the heavy maintenance so you can focus on production from day one. Service & Repair Highlights Tight & Responsive: We replaced pins and bushings throughout the machine wherever wear was detected, ensuring tight tolerances and smooth operation. Reworked Grapple: The grapple has been professionally serviced and refurbished to ensure maximum gripping power and structural integrity. Leak-Free Performance: All hydraulic leaks have been identified and repaired, with fresh seals installed to keep your pressures high and your job site clean. Ready for the Woods This isn't a "fixer-upper"—it’s a workhorse. Our technicians have cleared this unit for immediate duty, ensuring it meets the demands of high-cycle loading. Equipment financing and delivery available
1997 Trailking 5th wheel trailer serial number 1TKC01826VM049379. 18ft long deck. We used this on our farm. It has been parked for a few years. Equipment financing and delivery available
Just out of the shop. We replaced the saw head with an FD55. FD22B also available. Saw head checks out. New carbide teeth installed. Cylinders packed as needed. Replaced front valve bank. Pins and bushings replaced as needed. Nice clean cutter. Ready to work. Other tires available upon request. Equipment financing and delivery available
Fully Inspected & Field-Tested Feller Buncher – Ready for the Woods This machine has been thoroughly vetted through our shop and woods tested. We’ve focused on the critical components to ensure it’s job-site ready from day one. Key Upgrades & Repairs: Saw Head: Upgraded to a 2018 DW5603 head with brand-new bearings and seals. Hydraulics & Seals: Saw speed is dialed in. We’ve repacked cylinders and replaced front arm pins and bushings wherever necessary. Engine Maintenance: Freshly serviced with a new valve cover gasket, oil pan gasket, and rear main seal. Rubber: Deep rubber Maxam deep-tread tires. Buyer has the choice of 28L or 30.5 sizes to suit their terrain. This is a clean, reliable cutter that’s been through the ringer so you don’t have to. Ready to drop trees. Equipment financing and delivery available
Very nice 2019 Tigercat dual arch skidder. Ran through our shop and everything checks out mechanically. All new pins and bushings. New glass. Joystick control. HD axles with 95% Firestones. Deep rubber 30.5s. Equipment financing and delivery available.
2002 Caterpillar 525B skidder serial number CAT0525BA3KZ00581. This is a dismantled Cat 525B skidder for used Cat 525B skidder parts sales. No fire damage. Front half of skidder. Engine ran good when parted out. Transmission no good. Dozer blade, cylinders, and front axle still on machine.
2006 Caterpillar 545 skidder serial number CAT00545H2FZ00635. This is a dismantled Cat skidder for used Cat skidder parts sales. No fire damage. Dual arch skidder. Front and rear axles are still under the machine. Winch also available.
Sale!
New hydraulic lift cylinder seal kit for Caterpillar C Model Feller Bunchers. This seal kit fits Cat 553C, Cat 563C, and Cat 573C lift cylinders for the front arms of the feller buncher. Save $214.60 by buying Aftermarket over Caterpillar. This packing kit contains both barrel seal kit (377-0612) and the piston seal kit (377-0613) instead of having to buy separately from Caterpillar.

We have trusted financing partners standing by to work for you to get you the best rate
on your terms.

We have our own trucks and trusted hauling partners to get your equipment to you at
the best rates.

Have a trade in or need to sell your equipment?
We buy used logging equipment and salvage everyday.