$4,000.00
| Condition | Pre-Owned |
|---|---|
| Brand | |
| Length | 54 inches |
| Man or Hyd | Hydraulic |
| Location | 1418 Old Hwy 52 S Moncks Corner SC 29461 |
This heavy-duty hydraulic thumb is ready to work. Removed from a 210-240-size excavator, it includes the base plate and all necessary pins for installation.
Total Length: inches (Base plate to tip)
Pin-to-Tip Length: 53.5 inches (Center of pin to tip)
Overall Width: 18 inches
Base Plate Width: 10.5 inches
Base Plate Width: 70 inches
Pins: 60mm
We carry a wide variety of construction implements and boast the largest used logging parts inventory in the South.
Fast Logistics: We ship almost every day to get you back on the job site quickly.
Expert Support: Whether you need a specific attachment or a hard-to-find part, we’ve got you covered.
Contact us today at 843-761-8220 for all your used parts needs!
48" Caterpillar Excavator Bucket – 80mm Pins (Fits 20–25 Ton / Cat 320–325 Class) Heavy-duty 48-inch Cat excavator digging bucket in solid, work-ready condition. Built tough with plenty of wear life left on the cutting edge and floor. Pin holes and ears are tight with no excessive wear or egging. New bushing installed Specifications: Brand: Caterpillar (Cat) Width: 48 in Height: 60 in Pin Size: 80 mm Space between ears: 14 in Center to center: 19.5 in Machine Class: Commonly fits Cat 320, 321, 322, 323, 325, and similar 20–25 ton excavators (verify your machine's ear spread and center-to-center spacing) Condition: Good, ready to dig—teeth and shanks intact Great bucket for general excavation, trenching, mass dirt moving, or utility work. As the largest supplier of used logging and construction parts in the South, we understand that getting your machine back in the dirt is the top priority. Fast Shipping: We offer nationwide shipping almost daily. Financing Available: Take advantage of our flexible attachment financing options. Unmatched Inventory: We carry a massive selection of used buckets, hydraulic thumbs, and specialized attachments for all major brands. GET A QUOTE TODAY! Don't settle for a worn-out bucket. Upgrade to Tag quality and get the job done faster. 📞 Call Now: 843-761-8220 📍 Location: Moncks Corner, SC 🚚 Shipping: Nationwide delivery available!
This Bobcat E32i is the ideal balance of power and transportability, perfect for tight job sites or heavy residential work. Unlike many units found online, this machine has been fully vetted by our shop and is "work-ready" in the truest sense. We’ve gone through it top-to-bottom to ensure it’s reliable from the moment it hits your site. KEY SPECIFICATIONS & FEATURES Mechanical Condition: Excellent. The motor is powerful and runs strong with zero hesitation. Hydraulics: Fast, smooth, and highly responsive. Versatility: Equipped with a Manual Quick-Connect for easy attachment swaps and a Hydraulic Blade for grading and added stability. Shop-Evaluated: Fully inspected and serviced by our in-house technicians. All fluids and filters are up to date. WHY THE E32i? The E32i is a standout for its zero-tail-swing design, allowing you to work against walls or in confined spaces without the risk of damage. It’s a rugged, dependable unit built for immediate deployment. PURCHASING & LOGISTICS Financing: Competitive equipment financing is available to fit your budget. Delivery: Professional delivery available directly to your location or job site.
Bucket was taken off of a late model Cat 315. This is a 42 inch bucket. 65mm pin. 8.75 inches between ears. 16 inch center to center between bucket pins. This bucket has Caterpillar brand teeth and cutting edges. This bucket will fit a Cat 312, Cat 313, Cat 314, and late model Cat 315s that use 65mm pins. Attachment financing and shipping available. We have other buckets in stock. We have the largest used logging parts inventory in the south. Shipping almost daily. Call us today for all of your used parts needs 843-761-8220.
This bucket was removed from a Komatsu. This is a 36 inch bucket. 45mm pin. 6.75 inches between ears. 13.5 inch center to center between bucket pins. Attachment financing and shipping available. We have other buckets in stock. We have the largest used logging parts inventory in the south. Shipping almost daily. Call us today for all of your used parts needs 843-761-8220.
I do not believe this bucket was ever used. Pin size is slightly smaller than 90mm (3.5 inches). The bucket is 41 inches wide at the teeth. 37.25 inches wide at the bucket walls. 39.5 inches wide at the cutting edges. 15.5 inches between ears. 15.25 inches between H link ears. 21 inches center to center. Bucket is 66 inches tall. Tag says it probably fits a Cat 330. Attachment financing and shipping available. We have other buckets in stock. We have the largest used logging parts inventory in the south. Shipping almost daily. Call us today for all of your used parts needs 843-761-8220.
Enhance your machine's versatility with this Hydraulic Quick Connect. Originally removed from a 2007 Komatsu PC228 excavator, this heavy-duty coupler is engineered for rapid attachment changes and maximum job site productivity. Technical Specifications & Compatibility This hydraulic quick attach is designed to fit the Komatsu PC228 and other excavators utilizing a 80mm pin diameter. Please verify your machine's measurements against the specs below: Pin Diameter: 80mm Spacing Between Ears: 13 inches Pin Center-to-Center: 15.5 inches Compatibility: Fits Komatsu PC228 and most equivalent class excavators with 80mm bucket pins. Why Buy From Us? As the largest provider of used logging and construction parts in the South, we specialize in high-quality, work-ready attachments. Whether you need a quick coupler, thumb, or specialized bucket, we have the inventory to keep your fleet moving. Flexible Financing: Competitive attachment financing options available. Fast Shipping: We ship nationwide almost daily to minimize your downtime. Huge Inventory: Explore our wide selection of used buckets, hydraulic thumbs, and excavator attachments. Contact Us for Pricing Ready to upgrade your excavator? Don't miss out on this hydraulic quick connect. Call Today: 843-761-8220 Location: Serving the Southeast and beyond with reliable used heavy equipment parts.
This is a 36 inch bucket for a small excavator. 45mm pin with 50mm bosses. 6.75 inches between ears. 13.5 inch center to center between bucket pins. This is a nice bucket. Attachment financing and shipping available. We have other buckets in stock. We have the largest used logging parts inventory in the south. Shipping almost daily. Call us today for all of your used parts needs 843-761-8220.
This is a 48 inch bucket. 65mm pin. 10 inches between ears. 15.25 inch center to center between bucket pins. This is a very nice new bucket. Attachment financing and shipping available. We have other buckets in stock. We have the largest used logging parts inventory in the south. Shipping almost daily. Call us today for all of your used parts needs 843-761-8220.
>> IN OUR SHOP >> 2015 Doosan DX225LC currently in our shop being evaluated and repaired by our mechanics. Main hydraulic pump rebuilt less than 1000 hours ago by the previous owner. Machine has been serviced. We are repairing any leaks found. More information soon. Equipment financing and delivery available.

We have trusted financing partners standing by to work for you to get you the best rate
on your terms.

We have our own trucks and trusted hauling partners to get your equipment to you at
the best rates.

Have a trade in or need to sell your equipment?
We buy used logging equipment and salvage everyday.