Dependable Iron
for Over 50 Years
Send a Message
48 inch Cat Excavator Bucket | 80mm Pin
$3,500.00
| Condition | Pre-Owned |
|---|---|
| Brand | |
| Pin Size | 80mm |
| SB Space | 14 in between ears |
| Location | 1418 Old Hwy 52 S Moncks Corner SC 29461 |
48" Caterpillar Excavator Bucket – 80mm Pins (Fits 20–25 Ton / Cat 320–325 Class) Heavy-duty 48-inch Cat excavator digging bucket in solid, work-ready condition. Built tough with plenty of wear life left on the cutting edge and floor. Pin holes and ears are tight with no excessive wear or egging. New bushing installed Specifications: Brand: Caterpillar (Cat) Width: 48 in Height: 60 in Pin Size: 80 mm Space between ears: 14 in Center to center: 19.5 in Machine Class: Commonly fits Cat 320, 321, 322, 323, 325, and similar 20–25 ton excavators (verify your machine's ear spread and center-to-center spacing) Condition: Good, ready to dig—teeth and shanks intact Great bucket for general excavation, trenching, mass dirt moving, or utility work.
As the largest supplier of used logging and construction parts in the South, we understand that getting your machine back in the dirt is the top priority.
-
Fast Shipping: We offer nationwide shipping almost daily.
-
Financing Available: Take advantage of our flexible attachment financing options.
-
Unmatched Inventory: We carry a massive selection of used buckets, hydraulic thumbs, and specialized attachments for all major brands.
GET A QUOTE TODAY!
Don’t settle for a worn-out bucket. Upgrade to Tag quality and get the job done faster.
📞 Call Now: 843-761-8220 📍 Location: Moncks Corner, SC 🚚 Shipping: Nationwide delivery available!
Related products
-
80mm Excavator Buckets42 inch Doosan Excavator Bucket | 80mm Pin $3,000.00
42" Heavy Excavator Bucket (Fits 200–225 Class) Solid bucket in good working condition, recently pulled off a 225-size excavator. Freshly line bored pin holes, so there is zero slop at the connection. Ready to go to work as-is, or can install brand-new teeth and adapters for an additional cost. Specs & Dimensions: Width: 42" Pin Diameter: 80 mm Ear Spread (Between Ears): 14" Pin Center-to-Center: 18" Solid steel, no structural cracks. Pick-up preferred, but can help assist with loading onto your trailer or truck. As the largest supplier of used logging and construction parts in the South, we understand that getting your machine back in the dirt is the top priority. Fast Shipping: We offer nationwide shipping almost daily. Financing Available: Take advantage of our flexible attachment financing options. Unmatched Inventory: We carry a massive selection of used buckets, hydraulic thumbs, and specialized attachments for all major brands. GET A QUOTE TODAY! Don't settle for a worn-out bucket. Upgrade to Tag quality and get the job done faster. 📞 Call Now: 843-761-8220 📍 Location: Moncks Corner, SC 🚚 Shipping: Nationwide delivery available!
MORE INFO + -
Attachments64 in Tag Hydraulic Excavator Thumb $4,750.00
Heavy-duty used TAG Manufacturing 64" Hydraulic Main-Pin Excavator Thumb. Ideal for land clearing, demolition, log loading, rock handling, and general scrap/cleanup work. Removed from a 210-240-size excavator, it includes all necessary pins and mounts for installation. This thumb was used with a quick attach. TAG builds some of the toughest attachments on the market. Being a main-pin mount, this thumb tracks your bucket’s tip radius throughout the entire rotation so you don't drop loads midway through your cycle. Key Measurements & Specs: Brand: TAG Manufacturing Length: 64 inches (pin-center to tine tip) Pin Size: 80mm main pin bore Ear Width: 20 inches inside ear-to-ear spacing (max width 21.75 inches) Tine Spacing: 8.5 inches between tines (meshes cleanly with matching 80mm class buckets) Mount Type: Main-pin / bucket pivot mount Machine Compatibility: Direct fit / standard geometry for many popular 20–25 Ton (45,000–55,000 lb) class excavators running 80mm pins, including: CAT: 320 / 322 / 323 series John Deere: 200 / 210 / 225 / 230 / 240 Hitachi: ZX200 / ZX210 / ZX225 / ZX240 Komatsu: PC200 / PC210 / PC220 Link-Belt / Case: 210 / 240 / CX210 (Please measure your machine’s stick width, ear gap, and bucket tine layout against the 20" ear width and 8.5" tine spacing listed above to confirm fitment). Condition: Structurally straight and solid — no cracks, broken welds, or twisted frame. Aggressive serrated teeth intact with plenty of meat left. Pin bores are clean and round. Hydraulic cylinder is intact; rod is straight and clean. Normal cosmetic paint wear/scuffs typical of used heavy attachments, but completely work-ready. Logistics & Terms: Machine/forklift on-site to help load onto your trailer, flatbed, or pickup truck at no charge. Can palletize and arrange commercial freight delivery if needed (buyer covers freight quote). Message me directly with any questions or to schedule a time to come take a look. Contact us today at 843-761-8220 for all your used parts needs!
MORE INFO + -
Used ConstructionUsed 2018 Bobcat E32i Mini Excavator for Sale | 16 inch bucket | 300mm Rubber Tracks $32,900.00
This Bobcat E32i is the ideal balance of power and transportability, perfect for tight job sites or heavy residential work. Unlike many units found online, this machine has been fully vetted by our shop and is "work-ready" in the truest sense. We’ve gone through it top-to-bottom to ensure it’s reliable from the moment it hits your site. KEY SPECIFICATIONS & FEATURES Mechanical Condition: Excellent. The motor is powerful and runs strong with zero hesitation. Hydraulics: Fast, smooth, and highly responsive. Versatility: Equipped with a Manual Quick-Connect for easy attachment swaps and a Hydraulic Blade for grading and added stability. Shop-Evaluated: Fully inspected and serviced by our in-house technicians. All fluids and filters are up to date. WHY THE E32i? The E32i is a standout for its zero-tail-swing design, allowing you to work against walls or in confined spaces without the risk of damage. It’s a rugged, dependable unit built for immediate deployment. PURCHASING & LOGISTICS Financing: Competitive equipment financing is available to fit your budget. Delivery: Professional delivery available directly to your location or job site.
MORE INFO + -
40mm-45mm Excavator Buckets18 inch Excavator Bucket | 45mm Pin $750.00
This is a 18 inch bucket. 45mm pin. 8 inches between ears. 12.5 inch center to center between bucket pins. Attachment financing and shipping available. We have other buckets in stock. We have the largest used logging parts inventory in the south. Shipping almost daily. Call us today for all of your used parts needs 843-761-8220.
MORE INFO + -
40mm-45mm Excavator Buckets23 inch Excavator Bucket | 45mm Pin $500.00
The bucket appears to be in good shape. We believe they used it with concrete. The bucket is 23.5 inches wide. 7.25 inches between bucket ears. 12.25 inches center to center on pins.45mm pins. Attachment financing and shipping available. We have other buckets in stock. We have the largest used logging parts inventory in the south. Shipping almost daily. Call us today for all of your used parts needs 843-761-8220.
MORE INFO + -
90mm Excavator Buckets48 inch Hensley Excavator Bucket | 90mm Pin $1,500.00
This is a 48 inch CP bucket. 90mm pin. 13 inches between ears. Bucket has a hydraulic quick attach that has been welded on. 20 inch center to center on quick hitch connect. Currently does not have teeth. Does not come with the H link. Attachment financing and shipping available. We have other buckets in stock. We have the largest used logging parts inventory in the south. Shipping almost daily. Call us today for all of your used parts needs 843-761-8220.
MORE INFO + -
AttachmentsKomatsu PC228 Hydraulic Quick Attach | 80mm Pin Coupler $1,500.00
Enhance your machine's versatility with this Hydraulic Quick Connect. Originally removed from a 2007 Komatsu PC228 excavator, this heavy-duty coupler is engineered for rapid attachment changes and maximum job site productivity. Technical Specifications & Compatibility This hydraulic quick attach is designed to fit the Komatsu PC228 and other excavators utilizing a 80mm pin diameter. Please verify your machine's measurements against the specs below: Pin Diameter: 80mm Spacing Between Ears: 13 inches Pin Center-to-Center: 15.5 inches Compatibility: Fits Komatsu PC228 and most equivalent class excavators with 80mm bucket pins. Why Buy From Us? As the largest provider of used logging and construction parts in the South, we specialize in high-quality, work-ready attachments. Whether you need a quick coupler, thumb, or specialized bucket, we have the inventory to keep your fleet moving. Flexible Financing: Competitive attachment financing options available. Fast Shipping: We ship nationwide almost daily to minimize your downtime. Huge Inventory: Explore our wide selection of used buckets, hydraulic thumbs, and excavator attachments. Contact Us for Pricing Ready to upgrade your excavator? Don't miss out on this hydraulic quick connect. Call Today: 843-761-8220 Location: Serving the Southeast and beyond with reliable used heavy equipment parts.
MORE INFO + -
In Our ShopUsed 2015 Doosan DX225LC-3 Excavator for Sale | 48 inch bucket | Triple Grousers
>> IN OUR SHOP >> 2015 Doosan DX225LC currently in our shop being evaluated and repaired by our mechanics. Main hydraulic pump rebuilt less than 1000 hours ago by the previous owner. Machine has been serviced. We are repairing any leaks found. More information soon. Equipment financing and delivery available.
MORE INFO + -
Dismantled Excavators2013 Volvo EC220DL SN 210527
Dismantled Volvo excavator for used excavator parts. Bucket and thumb are gone. Booms, cylinders, and final drives are good. Call 843-761-8220 and ask for used parts for your excavators.
MORE INFO +
Financing Available
We have trusted financing partners standing by to work for you to get you the best rate
on your terms.
Delivery Available
We have our own trucks and trusted hauling partners to get your equipment to you at
the best rates.
Have a Trade In?
Have a trade in or need to sell your equipment?
We buy used logging equipment and salvage everyday.